RFI-EMI cable shielding

installation over cable bundle


installation by fully wrapping over top and bottom of flat cable width (shown partially detached for exhibit purposes only)


flex-circuit installation
RFI-EMI CABLE STRAP ABSORBER SHIELDING
SPECIFIC FREQUENCY RANGE TUNED; WITH PRESSURE SENSITIVE ADHESIIVE MOUNTING

APPLICATIONS

A very powerful high-frequency absorber which can be incorporated non-invasively with almost any component. For use on flat or round cables, cable groupings, flex-circuits and circuit board components; in particular when a specific frequency range or harmonic needs to be addressed. 2 - 3dB attenuation improvement is common.

Five frequency-specific formulations and our popular broadband formulation are available in easy-to-assemble strips which accommodate flat cable widths up to 2.5” (63,5mm), 50 conductors. Installs with adhesive backing by wrapping completely around flat (or round) cables with a .250” - .375” (6,3 - 9,5mm) overlap.
  • • Flat and round cables, flex-circuits, components
  • • Very low profile; little or no space consideration
  • • Considerable amount of attenuation in small footprint
  • • Lightweight, conformable, flexible, inconspicuous
  • • Frequency-specific tuning options: 50MHz - 5GHz
  • • Easy adhesive mount installation, very cost-effective
CHARACTERISTICS

(1) Tested in microline transfer fixture, results may not coordinate with open length cable applications. Specific testing of each application is recommended. See "EMI NOISE ABSORBER" section for full spectrum test results.

(2) Tested on attenuation analyzer, binding post fixture.
click on images for PDF file
All dimensions in inches millimeters ±1.6%, or ±0.005" 0,13 mm minimum

<< More RFI-EMI Cable Shielding
* click logo for Acrobat 4.0

HOME