Three common sizes in three frequency-specific formulations. Box-shaped assembly snaps over cables up to .400” (10,1mm) diameter. Optional foam adhesive mounting pad on bottom.
|
|
|
SLEEVE SNAP FOR ROUND CABLES Three common sizes in three frequency-specific formulations. Box-shaped assembly snaps over cables up to .400” (10,1mm) diameter. Optional foam adhesive mounting pad on bottom. |
|
|
 |
||||
 |
SLEEVE SNAP FOR ROUND CABLES WITH VARIABLE DIAMETER END PORTS. Four sizes fit cable diameters from .125” to .500” (3,2 to 12,7mm); end ports are surrounded by flexible spring flutes to grip a range of diameters. Three choices of frequency-specific material formulations. Optional foam adhesive mounting pad on bottom. |
 |
||
|
||||
 |
||||
 |
CABLE SNAP FOR ROUND CABLE Ferrite assembly in fully enclosed nylon case; functional with cables and bundles up to a 2.0” (50,8mm) diameter. Three choices of frequency-specific material formulations. Optional foam adhesive mounting pad on bottom. |
|||
|
||||
 |
CABLE CLAMP FOR FLAT CABLES WITH OPTIONAL ADHESIVE MOUNTING. Ferrite assembly clamps over flat cables up to 64-conductor widths 3.24” (82,3mm). Optional adhesive pad mounts on bottom; or, may be mounted with flat-head screws through the .120” (3,0mm) diameter holes on 1.25” (31,8mm) centers in the bottom by temporarily removing the lower ferrite half. |
 |
||
|
||||||
|
<< Click here for more RFID Shielding >> |
||||||
 |
||||||
| * click logo for Acrobat 4.0 | ||||||