 |
PCB HIGH ATTENUATION RF ABSORBER TILES
with tuned RF absorber membrane: for PCB components
Absorbs RFI right at the source before resonance and harmonics effects are transferred to neighboring components. Two ferrite substrate formulas offer peak impedance at 200 MHz and 700 MHz, respectively, with measurable performance up to 1.2 GHz. The absorber membrane complements the attenuation profile up to 5.0 GHz with peak performance at 3.2 GHz.
For optimum results, the absorber membrane is positioned to face the RF source. A second absorber tile under the component on the opposite side of the circuit board will dramatically increase the effective RF attenuation by a factor of four (4) depending on frequency.
Attaches to any surface with optional adhesive foam base or common electronic adhesives bonded to the absorber membrane side. |
|
