PCB Flexible Faraday Cage Shields
PCB FLEXIBLE FARADAY CAGE SHIELDS
with optional specific frequency tuned RF absorber inserts

Self-sealing polyethylene shields fully enclose circuit boards providing local RF isolation. The RF absorber matrix is bonded between dielectric layers forming a total Faraday Cage protection. Optional single or double leaf RF absorber inserts dramatically add to impedance properties up to 5 GHz. The tough puncture-resistant 3 mil body closes with a reusable zipper lock. Click here for EA3200H wideband absorber specs.
  • RF shield for PCB’s; semi-transparent for easy identification
  • Conforms to any shape
  • Anti-static use for storage or shipping sensitive components (w/o inserts)
  • Environmental seal for dust, moisture, contaminants



PCB "In Situ" Shield Test Fixture

With this massive amount of insertion loss material introduced in the vicinity of RF emissions from a PCB, a proximate absorber attenuation effect occurs. The combined effect of the ferrite substrate and the EA3200H absorber membrane proves very useful in most R&D situations to determine PCB shielding needs. Afterwards, a properly configured PCB shield can be determined.

Can be attached right on top of circuit components with the dielectric foam liner facing the circuit. Comes with temporary installation straps and one flexible Faraday Cage Shield (see above) as alternate retaining methods during testing.

All dimensions in inches millimeters ±1.6%, or ±0.005" 0,13 mm minimum

<< Click here for more PCB Shielded Enclosures >>
* click logo for Acrobat 4.0
Return to Index >>

HOME